Changing the Switching Order on the Surefire Sidekick.

in 2015 Surefire released one of the coolest EDC/ Utility flashlights to date. The Sidekick A. This little light is about the size of your car keys remote and is capable of putting out 300 lumens of bright white light! The even better part is it uses a micro USB charging port so you can literally charge it anywhere using a wall or outlet charger or even your laptop. It boasts a run time of 1.25 hours on the maximum setting and up to 45 hours on the lowest.

Click here to purchase the Surefire Sidekick. Use the code: SUREFIRE ARTICLE to save 15% on all Surefire Lights
    

The light has 3 different switching modes. Low (5 lumens), Medium (60 lumens) and High (300 lumens). It comes from the factory with the first output being low, then switching to medium and then high with each press of the button. If you want to reverse the order and have the first output be #AllTheLumens then this procedure will walk you through the process.

Step 1. Plug the light into a power source with the provided cable.
                 -The LED should come on briefly and then shuts off before it starts blinking.

Step 2. Press the power button 3 times. (Turn it on, then off, and then back on     again. Leave it on for a minimum of 6 seconds.)

Step 3. Turn it off and then unplug it from the power source.

Your lights output order should now be the opposite of what it was. To change it back, simply repeat the process.

Hopefully you found this helpful. Be sure to share it with your friends and if you have any questions, please feel free to contact me. Ike@BigTexOutdoors.com