Sale!

Combo: Aridus Industries Co-witness Ready Optic Mount CROM + Aimpoint Micro H2

$839.99$855.99

Order by 2PM CST for Same Day Shipping*
Shipping As Low As $1.99
100% Live Inventory, No Back Orders

This includes a CROM + Aimpoint Micro H2

The Co-witness Ready Optic Mount (CROM) is a direct mount for attaching an RMR or  Aimpoint Micro (H1, T1, H2, T2) to your Beretta 1301 Tactical Shotgun, Remington, or Mossberg shotgun. The CROM replaces the factory plastic rail and rear sight and directly mounts the optic to the shotgun’s receiver. This allows the optic to sit much lower, providing a consistent and proper cheek weld. The CROM utilizes an XS rear ghost ring that is adjustable for both windage and elevation. This gives you the ability to co-witness the rear ghost ring and the factory front sight, allowing an emergency backup sighting system in case of optic failure. Made in the U.S.A Covers must be removed to work with the H2/T2.

 

Rob Haught Mod: Inspired by the preferred Ghost Ring setup of legendary shotgun instructor Rob Haught, this modified aperture allows for quicker sighting and a cleaner sight picture when using a red dot optic with the CROM. The top half of the XS Sights aperture is milled off, resulting in an open U notch. The aperture is then deburred, sanded, and parkerized.

 

Notes: The zero of a shotgun is very dependent on the specific barrel and ammunition used. While the XS rear sight allows for a wide range of adjustment, we cannot necessarily guarantee a perfect co-witness. However, all testing has shown excellent usability with a variety of loads and guns.

If your Remington shotgun is not drilled and tapped using the Remington pattern, consult a qualified gunsmith.

Covers must be removed to work with the H2/T2.

 

 

Aimpoint® Micro H-2

Having trouble deciding on which Aimpoint Micro sight to get? Check out this buying guide for a side by side comparison. AIMPOINT MICRO BUYING GUIDE

TAKING THE PERFORMANCE OF COMPACT REFLEX SIGHTS TO AN ENTIRELY NEW LEVEL
The all new Micro H-2 redefines everything you thought you knew about compact red dot sights.
Inside the completely new sight housing are advanced optical lenses that takes optical performance to a new level. Cutting edge lens coatings radically improve the shape and clarity of the 2 MOA (also available in 4 MOA) red dot – especially when used with an accessory magnifier.

Lightweight sight for extreme conditions
Built to offer the same battle-proven ruggedness as other Aimpoint products, the Micro H-2 performs reliably under extreme conditions while adding negligible weight to your weapon. Suitable for use on

Rifles
Carbines
Shotguns
Submachine guns
Handguns

The Aimpoint Micro H-2 Red Dot Sights are designed with the hunter in mind, being the lightest red dot sights tough enough to bear the Aimpoint name. Small enough to be used anywhere that you could put iron sights, these reflex sightscan be used on any type of firearm or archery equipment. A lightweight rifle with an Aimpoint H2 Micro red dot sightmounted on it remains a lightweight rifle! A hunting revolver with the Aim-point H2 Micro Sight installed remains as easy to carry as with iron sights and is much quicker to aim. On a bow, the parallax-free this Aimpoint red dot scope eliminates the need for a peep, allowing you to shoot accurately in lower light.
Unique features of the Aimpoint Micro H-2

Advanced optical lenses for even better light transmission
Front Flip-up lens cover is included
Transparent rear Flip-up lens cover is included
Reinforced protection of the turrets for even greater ruggedness
Ideal for rifles, carbines, shotguns, submachine guns, and handguns
Weight 3.7 oz. (105g) including mount, sight only 3.0 oz. (84g)
1X (non-magnifying) parallax free optic
ACET technology allows 50,000 hours (over 5 years) of constant operation with one battery
Available in 2 MOA & 4 MOA dot size
Hard anodized non-reflective finish

Standard features for all Aimpoint® sights

Unlimited field of view
Parallax-free and unlimited eye relief
Unaffected by extreme weather conditions
Rugged, durable construction
No hazardous materials
No laser emission that could be harmful to your eyes
Mechanical switch for speed and reliability
Increased aiming confidenceRelated Products:Aimpoint H1Aimpoint T1

GENERAL DATA

Technology
ACET (Advanced Circuit Efficiency Technology)

Working principle
Reflex collimator sight – red dot sight

OPTICAL DATA

Lightsource
LED (Light Emitting Diode) totally eye-safe

Red dot size in MOA (minute of angle)*
2 or 4

Parallax
Absence of parallax -No centering required

Eye relief
Unlimited

Night vision compatibility
No

Anti-reflex coating all surfaces & multi-layer coating objective lens
Yes

Magnification
No magnification (1X)

ELECTRONIC DATA

Battery
One 3V Lithium battery, type CR2032

Battery life in hours **
50 000 (over 5 years of continuous use)

Dot intensity adjustment
Manual rotary switch

Daylight (DL) settings
1 Off & 8 DL of which one extra bright

MECHANICAL DATA

Material housing
Extruded high strength aluminum

Surface finish
Hard anodized, semi-matte

Color housing
Black

Adjustment 1 click
13mm at 100m, (1/2” at 100yds)

Mounting methods
Integrated Picatinny/Weaver

ENVIROMENTAL DATA

Temperature range
-45° – +71° C, (-50° – +160° F)

Radioactive components used
None

DIMENSIONS

Length
68mm, (2.7”)

Width/height sight only
41 x 36mm, (1.6” x 1.4”)

Width/height including mount
62 x 41mm, (2.4”x 1.6”)

Weight sight only
96g, (3.4oz)

Weight sight with integrated mount
139g, (4.9oz)

* 1 MOA ˜ 30 mm at 100 meters ˜ 1” at 100 yards.** at room temperature & at setting 8 out of 12.Specifications are subject to change without notice.

Additional information

Weight 6 oz
Dimensions 8 × 12 × 4 in
Shotgun Model

Beretta 1301T, Remington, Mossberg

Optic Type

RMR, Aimpoint

Aperture Type

Standard Ghost Ring, Rob Haught Mod

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.