Hodge Defense Mod 1 Upper Receiver V1.5 – 7075 Aluminum, Black

$139.99

Order by 2PM CST for Same Day Shipping*
Shipping As Low As $1.99
100% Live Inventory, No Back Orders

Limit 1 per household.

Please read the description below for differences between the Mod 1 V1.5 and Standard Mod 1 receivers. 

(17 customer reviews)

Out of stock

Join the waitlist to be emailed when this product becomes available

Hodge Defense Mod 1 stripped upper receiver V1.5

These receivers are from Cero 7075-T6 forgings and have slightly different specs than typical Hodge receivers have. These were a special run done for a customer that wanted a more “Mil-spec” receiver.

Some changes between traditional HDSI Mod 1 receivers and this V1.5variant are:

Reciever lug width
-Standard HDSI Mod 1 receivers have slightly oversized lugs to ensure a tight fit between the upper and lower receivers. The Mod 1 V1.5 variants DO NOT have oversized lugs. They have a width of approximately 0.496″ per the original TDP.

-Dry Film Lube
-Standard HDSI Mod 1 receivers do not have DFL. This run of receivers include a Dry Film Lubricant on the inside of the receivers. It should be noted that this lube is NOT permanent and that you still need to lubricate your receiver.

-T marks
-Standard HDSI Mod 1 receivers have T markings on the top of the Picatinny rail. This run DOES NOT have T-markings.

 

One thing that remains the same between this receiver and standard HDSI Mod 1s is that the barrel seat bore is slightly UNDERSIZED. This upper will require thermal fitting to install the barrel. We have a handy guide that can assist you HERE.

The Mod 1 V1.5 uppers also feature a new shamrock logo

 

 

FEATURES:

  •   7075-T6 Aluminum
  • Anodized per Mil-A-8625, Type III Hard Coat Finish
  • M4 feed ramps
  • Mil-Std 1913 Rail
  • DFL

Made in the USA

Discount codes will not work on these

 

 

Additional information

Weight 80 oz
Dimensions 10 × 5 × 4 in
Finish

,

17 reviews for Hodge Defense Mod 1 Upper Receiver V1.5 – 7075 Aluminum, Black

  1. hodge175 (verified owner)

    About 3yrs ago I decided to start building some Hodge rifles, I am named after my Grandfather and I fiquared it would be cool to have our first names on a rifle. I am knew of Jim’s brand and have been happy with the parts I have be able to get. Do they take longer to get, yep and are they more expensive at time yep. But I will say they have some of the best fit and finish I have ever seen in a AR15. These new Mod 1 ver. 1.5 are no different. very tight on the barrel extension and even though these use the TDP lug size they still fit very snug on lower receivers. If you decide to buy Hodge parts BTO is one of the best places to find them. Good luck hunting, you will be happy when you get his parts.

  2. jn4auto (verified owner)

    Great upper with the new design

Only logged in customers who have purchased this product may leave a review.