*Clips are sold individually. One each = one clip*
- 2.73″ OAL
- Fits over belts up to 1.5″
- (2) .220″H x .300″W oval mounting holes will work with spacing that is .860″ – 1.15″ on center.
- Standard DMG/Cu finish: Color – DCC dark matte grey. Non reflective and resists corrosion very well
- Works with or without a belt.
- Hardware not included. It is available separately on this page as an add on option.
Optional low profile hardware kit contents and features:
- (2) Low profile 1/4” Chicago Screws brand combo screws with thread patching (pre applied threadlocker)
- (2) steel washers
- (2) steel square nuts
- Standard DMG/Cu finish on all components: Color – DCC dark matte grey. Non reflective and resists corrosion very well
- The Monoblock is engineered to be mounted directly to the holster body or other solid surface. Recommended hardware configuration from top to bottom: Screw, steel washer, monoblock clip, body of the holster. The nut is placed on the inside. For some applications, the metal washer can be placed behind the clip or may not be used at all..
Care and maintenance: Our surface finish does not need much attention. If any light scratches or wear marks develop, we recommend a quick yet firm buff with WD40, but anything from vegetable oil to mineral oil to CLP to motor oil will work well. Just put a couple drops on your clip and rub it in vigorously using firm pressure with a lint free cloth. This will help keep it looking it’s best cosmetically.