Forward Controls Design URF v3

MSRP: $240.00
You save $12.00


Order by 2PM CST for Same Day Shipping*
Shipping As Low As $1.99
100% Live Inventory, No Back Orders

(1 customer review)

10 in stock

Purchase this product now and earn 228 Points!
NOTE: URF v3 pre-production units are the first run units, they have tool marks, and are marked down as a result.

URF v3 is a follow on development of URF-B v2, and will replace URF-B, v2 as we ramp up production. Functionally, v3 and v2 share the same features, even if v3 looks slightly different than v2.

URF v3 retained the following features:

* LMT MARS-L lower compatibility
* Compatibility with most MLOK and Picatinny handguards
* Beveled area in the upper rear section to allow easier folding backup sight access
* Hole above the gas tube hole for handguards that use a pin for anti-rotation.

Additional changes for URF v3:

* Beveled area for BUIS access is now on all three sides (left, right, and rear)
* Slightly wider receiver wall, this has the effect of forming a fence for the bolt catches
* Charging handle latch pocket changed to be closer to TDP spec (0.06) and tolerances while maintaining compatibility with 3rd party charging handles (many uppers have this pocket at 0.08, twice the TDP spec depth at 0.04, +0.000/0.02)
URF v3 are billet uppers machined from 7075, and Type III hard coat anodized.
Weight: 9.01oz.
Proudly designed and made in USA.
Re: a tight fit between the upper and lower, this is an often asked question so we’ll discuss it briefly.  Tighter is better for some applications, a tight fitting upper and lower isn’t one of them.  URF v3’s pivot pin and take down pin lugs are made according to TDP dimensions and specs, we don’t make them oversized in order to create a tight fit with any lower receiver, since it doesn’t do a thing for accuracy and reliability.

Additional information

Weight 9.01 oz
Dimensions 8 × 3 × 3 in

1 review for Forward Controls Design URF v3

  1. bbrown521 (verified owner)

    This was a great choice. One of the best receiver sets out there. Had to have the upper to match the lower. The design was nailed it makes you have to get the rest of the FCD parts to build it how it was meant to be built.

Only logged in customers who have purchased this product may leave a review.