These are the screws to secure the MOS plate to the Glock slide. For screws to secure an RMR to the MOS plate, we have the Trijicon AC32064 kit available HERE
Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws. A Torx-Plus drive has more points of contact than other drives, allowing you to tighten the screw without damaging the recess. For Torx tools, see Torx and Torx-Plus bits, keys, and drivers. These screws can be used with both Torx-Plus and Torx tools. They’re angled under the head to sit flush within countersunk holes. Length is measured from the top of the head. These are the proper length for the Glock MOS plates. These will secure the optic plate to the slide. For securing the optic to the plate, select a different screw. These are of higher quality than the standard screws supplied with the MOS from the factory. Be careful not to over-tighten 14-18 inch pounds of torque is sufficient. These will use a T10 driver or key.
|Thread Pitch||0.5 mm|
|Head Diameter||6.72 mm|
|Head Height||1.86 mm|
|Drive Style||Torx Plus|
|Drive Size||IP10, T10|
|Material||Black-Oxide Alloy Steel|
|Fastener Strength Grade/Class||Class 12.9|
|Tensile Strength||140,000 psi|
|Thread Fit||Class 4g6g|
|Thread Direction||Right Hand|
|Flat Head Profile||Standard|
|System of Measurement||Metric|
jdun205 (verified owner) –
Top quality and great packaging. Always get back up screws!