Modlite Multi-Mode PLHV2 Light Head FDE
$209.00
Order by 2PM CST for Same Day Shipping*
Shipping As Low As $1.99
100% Live Inventory, No Back Orders
2 in stock
Frequently Bought Together
This light head is a direct replacement for the Surefire M600DF head. It can be used with the Modlite 18650 body or the smaller Modlite 18350 body. While lumen output with this light is similar to the Surefire M600DF, the throw is much better suited to allow PID (Positive ID) at greater distances at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.
Features:
- Hand assembled in and tested in the USA.
- Lifetime guarantee
- Approximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use
- 6061 Series Alum bezel with Mil-Spec Hard Anodizing.
- Ultra clear BOROFLOAT® lens allows 98-99% light transmittance.
- Can be used with CR123 batteries “Dual Fuel”.
- 2 selectable modes: High Mode/High+ Amin.
- Admin Mode is 15% of High output
- Easily user-programmable
- High mode is always prioritized.
- No strobe modes or needless cycling through modes.
Technical Specs:
Admin Mode Run Time (OKW & PLHV2):
High 18650 – 75 minutes
High 18350 – 35 minutes
Admin 18650 – 10.6 hours
Admin 18350 – 3.6 hours
Heads are differentiated by clear, lasered markings – “Dual Fuel” and “Multi-Mode”.
User Programmable:
Heads will ship in High only mode by default. Users can choose to switch to the High/Admin mode by:
1. Activate the light 12 times rapidly on and off.
2. Hold the tailcap on the 12th activation
3. The light will pause after the 12th activation, then flash twice. You have now activated the Admin feature.
4. To switch back to high lock mode, simply repeat the 12-tap process.
Note: An instructional QR code with linked video instructions will be included.
Do not stack 18350 cells into an 18650 body this can cause the light to malfunction. Only use 18650 cells in 18650 bodies and 18350 cells in 18350 bodies.
Additional information
| Weight | 2 oz |
|---|---|
| Dimensions | 2 × 2 × 3 in |
| Tailcap Options | Modlite Clicky Tailcap, No Tailcap |
1 review for Modlite Multi-Mode PLHV2 Light Head FDE
Only logged in customers who have purchased this product may leave a review.
Adam Garnier (verified owner) –
This is the head I’ve been waiting on since the initial release. Having a secondary power option is great for the patrol purposes. This one is sitting on a hog body and I’m expecting even more life out of the battery.