SOLGW M4-EXO2 11.5″ Pistol with EXO2 Rail | Sons Of Liberty Gun Works

Features:

• 11.5” 5.56 NATO barrel
• 4150 chrome moly vanadium steel
• HPT and MPI
• QPQ Nitride finish
• 1/7 twist rate
• Carbine length gas system
• 4140 steel .750” gas block
• EXO2 M-LOK free float handguard
• 1/2×28 with A2 flash hider
• 7075-T6 aluminum Cerra forged receivers
• Angry Patriot lower receiver
• Type III Class 2 hardcoat anodized black
• Radian Raptor charging handle
• Liberty Fighting Nickel Boron trigger
• Magpul MOE grip
• SB Tactical SBA3 arm brace
• Intermediate A5 buffer system
• T-Marked upper
• Dry film lube bolt carrier channel

At Sons of Liberty Gun Works we believe in Quality Mil-Spec or better parts. We believe there is no substitute for quality and that your gun should be built right the first time, ready for hard use right out of the box. We believe a quality Bolt Carrier Group and a quality, accurate and long lasting barrel are the heart of a Combat Grade weapon. We believe in properly tuned weapons using the correct gas system length and quality buffer system components such as the Vltor A5 system and Sprinco Tactical Buffer Springs. We believe in our products and we back them up with a Lifetime Warranty. Our weapons our meant to be used hard and go in harm’s way, they won’t let you down.

All rifles are test fired twice in shop to ensure proper function.

The SOLGW M4-EXO2 is a great entry level Complete AR-15 pistol that comes with all the features you want for a reliable, do-it-all carbine built for duty. This model features an ll.5” barrel machined from 4150 chrome moly vanadium steel and QPQ Nitride finished inside and out. The six groove 1/7 twist rate is optimal for heavy 62 grain 5.56 NATO surplus ammunition. The carbine length gas system and appropriate gas port size ensures reliable function under any conditions and minimal recoil. The government profile barrel and gas system are protected by the EXO2 free float handguard with M-LOK slots for full customization potential.The SOLGW M4-EXO2 is a great entry level Complete AR-15 pistol that comes with all the features you want for a reliable, do-it-all carbine built for duty. This model features an ll.5” barrel machined from 4150 chrome moly vanadium steel and QPQ Nitride finished inside and out. The six groove 1/7 twist rate is optimal for heavy 62 grain 5.56 NATO surplus ammunition. The carbine length gas system and appropriate gas port size ensures reliable function under any conditions and minimal recoil. The government profile barrel and gas system are protected by the EXO2 free float handguard with M-LOK slots for full customization potential.

Sons of Liberty Gun Works Bolt Carrier Group HPT/MPI Check out the specs here:

https://sonsoflibertygunworks.com/collections/components/products/solgw-bolt-carrier-group-158-carpenter-sp-hpt-mpi?variant=3084070593

Barrel: Sons of Liberty Gun Works 16” 4150CoMOV 1:7 MPI HPT Barrel
Caliber: 5.56 NATO Chamber
Barrel Steel: 4150 CrMoV (Chrome Moly Vanadium per MIL-B-11595E)
Twist Rate: 1/7 Twist Six Groove
Thread Pitch: 1/2-28 Threaded Muzzle
Gas Block: .750″ Gas Block Journal with an appropriately sized gas port
Weight: 27 Ounces
Barrel Finish: QPQ Corrosion Resistant Finish
Barrel Extension: QPQ coated M4 Feed Ramp Extension
High Pressure (proof) Tested (HPT)
Magnetic Particle Inspected (MPI)

Lower Receiver: Sons of Liberty Gun Works Forged Lower Receiver – Receiver design will vary
Material: Made from Mil-Spec 7075-T6 aluminum forgings
Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
Contour is fully machined leaving no flash marks from the forging.
All lowers are cut with M16 auto pocket.
Safe, Fire, and Full Auto Pictograms.

 

Fire Control Group: Sons of Liberty Gun Works Liberty Fighting Trigger (LFT) with consistent 5.5lb pull.

Safety Selector:
Sons of Liberty Gun Works Selector

Grip: B5 Systems Grip – Black

Stock: SBA3 Pistol Brace

Upper Receiver:
Material: Made from Mil-Spec 7075-T6 aluminum forgings.
Exterior Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
Interior Finish:Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
T-Marks: Engraved T-Marks

Charging Handle: Raptor Ambi -LT

Gas Block: Sons of Liberty Lo-Pro Gas block made from 4140 Steel and Nitride Treated with Knurled Head Set Screws

Gas Tube: Sons of Liberty Standard Mid Length Melonited Stainless Steel

Rail System: Sons of Liberty Gun Works EXO2 MLOK Rail

Muzzle Device: SOLGW NOX

Sights: Front and Rear Magpul MBUS

Includes: Allen TacticalSoft Case, Three OKAY Industries Surefeed 30rd Mags, SOLGW Sticker & Patch, copy of the US Constitution, Steel M-LOK QD Socket and LIFETIME Warranty Certificate