• Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
• Comes pre-assembled with rubber buttpad and strike plate
• Rolled/ angled buttpad with a wide traction area
• Matte (anti-reflection/anti-glare) finish
• Impact and temperature resistant polymer, specifically blended for VLTOR stocks
• Has standard military and quick disconnect swivel socket accessible from both sides
• Kit (Mil-Spec only) includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
• Available in Mil-Spec or Commercial configuration
• Available in Standard or Clubfoot style

• Length with buttpad: 6.26 inches (at centerline of tube)
• Standard Weight: 9.5 oz
• Clubfoot Weight: 9.9 oz
• LOP fully collapsed: 10.25 inches
• LOP fully extended: 13.50 inches
• Receiver extension is made of 7075 T6 impact extrusion

1. What is the difference between the EMOD and the IMOD stock?

The EMOD stock only comes in the clubfoot configuration whereas the IMOD comes in standard and clubfoot. The EMOD also has the additional storage compartment in the foot of the stock. The EMOD is 1.50 inches longer than the IMOD for longer length of pull.

 2. What is the difference between Standard and Clubfoot?

While the Standard configuration is the most well-known style, the Clubfoot version is a hybrid model that bridges the gap between tactical and prone shooting positions. The Clubfoot portion of the stock allows the shooter, with his/her off hand, to support the stock and to control the rear of the weapon, while shooting in prone or rested position.

 3. Is there any adaptor that I can purchase to take off the battery compartments and have something fill the void?

At this time we do not sell a product that will allow you to take off the battery compartments and fill that void with something. The original modstock cheekweld adaptors will fit the IMOD but it does not fit the full length of the stock.

 4. Do you sell a product or know of a product that I can install to raise the cheekweld on the stock?

We do not sell a product that will allow you to raise the cheekweld on the EMOD or IMOD stock nor do we know of anything that you can attach to the stock to make the cheekweld higher.