C & H Precision GLOCK MOS Plates V4 MIL/LEO | Trijicon RMR/Holosun 407C, 407C V2, 507C, 507C V2 | 508Tv2 | 509T & ACRO
$35.21 – $60.21
Order by 2PM CST for Same Day Shipping*
Shipping As Low As $1.99
100% Live Inventory, No Back Orders
Description
What is the V4 Series of Adapter Plates and Why?
The CHPWS V4 Series of adapter plates has evolved over the past five years because the OEM mounting plates are the weakest link in the Red Dot System.
The new V4 Series address two specific areas in the Red Dot Mounting:
Mounting Hardware
All new V4 plates will feature our Patent Pending replaceable stainless steel T-Nuts and stainless steel Torx® head screws which are used to mount the RDS (Red Dot System) to the V4 plate giving you the ability to replace the mounting hardware without replacing the entire plate.
The V4 Series retains its industry leading six to seven full revolutions of thread engagement for maximum retention.
6061 Aluminum Plate
Type III MIL-Spec Hard Anodize Coating
Qty 2 – 416 Stainless steel T-Posts
Qty 2 – Torx Head Screws
Qty 2 – M3 Screws
Qty 2 – Torx Bits T8 / T10
Single Use Pack of VibraTite VC-3
Additional information
| Weight | 2 oz |
|---|---|
| Dimensions | 4 × 3 × 2 in |
| Select Firearm | Full Size Glock 9mm (19, 17, 34, 45 etc), Glock Slimline 9mm (43x/48 MOS) |
| Select Sight | Trijicon RMR/SRO Holosun 407c / 507c / 508T, Aimpoint ACRO, Leupold DPP, Holosun 509T, Holosun 407k/507k |
39 reviews for C & H Precision GLOCK MOS Plates V4 MIL/LEO | Trijicon RMR/Holosun 407C, 407C V2, 507C, 507C V2 | 508Tv2 | 509T & ACRO
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
-
-
Sights And Optics, Red Dot Sights
MSRP: $932.00 - $950.00$839.00 Select optionsYou save up to $95.00
DR (verified owner) –
Tight fit and quality machining. Optic mounted evenly with no gaps, I would buy again.
CMack (verified owner) –
Adding a second review for the 509T plate. While the 507 plate I purchased was excellent, the 509T plate I purchased had strange machining wave marks in it, and was visibly not flat. After seeing these issues, I contacted CHPWS. Customer service was difficult to deal with, but eventually I was sent out a replacement plate. The replacement plate was much more cleanly machined, and has been holding up well on my work 34.5 MOS.
That said, at the time I did not know Big Tex would help out customers who have issues with products. The experience with CHPWS was difficult, but as they’re nearly the only game in town, I would purchase another plate, but would ensure it came from Big Tex. The customer service and support at Big Tex is better than any I’ve ever experienced and is a huge part of why I’m a repeat customer.
CMack (verified owner) –
Quality machining on this plate. Fit was tight to the slide, and the Holosun 507 mounted securely as well. No issues with screws backing out so far. Much more confidence inspiring than the factory MOS plate.
CMack (verified owner) –
Quality machining on this plate. Fit was tight to the slide, and the Holosun 507 mounted securely as well. No issues with screws backing out so far. Much more confidence inspiring than the factory MOS plate.
lknguyen1996 (verified owner) –
Fast shipping and the best prices around