C & H Precision GLOCK MOS Plates V4 MIL/LEO | Trijicon RMR/Holosun 407C, 407C V2, 507C, 507C V2 | 508Tv2 | 509T & ACRO
$35.21 – $60.21
Order by 2PM CST for Same Day Shipping*
Shipping As Low As $1.99
100% Live Inventory, No Back Orders
Description
What is the V4 Series of Adapter Plates and Why?
The CHPWS V4 Series of adapter plates has evolved over the past five years because the OEM mounting plates are the weakest link in the Red Dot System.
The new V4 Series address two specific areas in the Red Dot Mounting:
Mounting Hardware
All new V4 plates will feature our Patent Pending replaceable stainless steel T-Nuts and stainless steel Torx® head screws which are used to mount the RDS (Red Dot System) to the V4 plate giving you the ability to replace the mounting hardware without replacing the entire plate.
The V4 Series retains its industry leading six to seven full revolutions of thread engagement for maximum retention.
6061 Aluminum Plate
Type III MIL-Spec Hard Anodize Coating
Qty 2 – 416 Stainless steel T-Posts
Qty 2 – Torx Head Screws
Qty 2 – M3 Screws
Qty 2 – Torx Bits T8 / T10
Single Use Pack of VibraTite VC-3
Additional information
| Weight | 2 oz |
|---|---|
| Dimensions | 4 × 3 × 2 in |
| Select Firearm | Full Size Glock 9mm (19, 17, 34, 45 etc), Glock Slimline 9mm (43x/48 MOS) |
| Select Sight | Trijicon RMR/SRO Holosun 407c / 507c / 508T, Aimpoint ACRO, Leupold DPP, Holosun 509T, Holosun 407k/507k |
39 reviews for C & H Precision GLOCK MOS Plates V4 MIL/LEO | Trijicon RMR/Holosun 407C, 407C V2, 507C, 507C V2 | 508Tv2 | 509T & ACRO
Only logged in customers who have purchased this product may leave a review.
Related products
-
Original price was: $114.95.$105.21Current price is: $105.21. Select options This product has multiple variants. The options may be chosen on the product page
-
MSRP: $265.00$241.00 Select options This product has multiple variants. The options may be chosen on the product pageYou save $24.00
LS (verified owner) –
Easy to install and much more sturdy/reliable than the factory plate.
nickpo88 (verified owner) –
Game changing mount for glock!
Ralph Montoya (verified owner) –
Good quality plate with tight tolerances. I have put over two thousand rounds through a Glock19MOS with no issues.
Robert Pittman (verified owner) –
very tight fit, easily installed.
Ty (verified owner) –
Plate install is simple and they included a QR code in the package to install the video. Install of the optic was simple, but ensure to witness mark your screws. I generally don’t loctite optics, and the provided Holosun screw backed out on me enough to have some front to back sliding of the optic on the plate. Zero went from dead on at 25m to a 7m zero. Retightened and have had no issue since.